HEAT DISSIPATING UV CONVEYOR BELT

The CON-TROL-CURE^® HEAT DISSIPATING UV CONVEYOR BELTs are specially designed to withstand high levels of radiation emitted from a UV curing system. Special PTFE coating over the fiberglass mesh contains carbon black to dissipate heat very rapidly. Suitable for smaller UV curing systems which provide limited belt cooling time. PTFE coating also provides higher resistance to solvents, harsh detergents, acids, alkalies and corrosive chemicals. Available with Teflon® sewn-and-sealed edges. Also available using Kevlar® mesh construction (B002-006). Custom-sized to your specifications. 1/4" open mesh. Choice of splice: Alligator®, Clipper®, or Soft Seal®.

• Working Tension: 50 lbs/inch of width
• Pulley Diameters: As small as 1"
• Edge Reinforcement: 2 rows of 1" fiberglass, sewn and sealed
to prevent unraveling
• Chamber: Allowed 1"/100' or less
• Widths: Up to 72" (Wider belts- special order)

FILL OUT THE CONVEYOR BELT FORM USING PDF LINK ON BOTTOM OF THIS PAGE OR CALL FOR MORE INFORMATION ABOUT HEAT DISSIPATING UV CONVEYOR BELTS FOR YOUR SPECIFIC APPLICATION.

SILICONE CONVEYOR BELTS: Additional sizes available upon request.
(B002-003) - This belt has the following specifications:
Full Length - 63"
Width - .39"
Thickness - .020" (.040" at the seam)
Minimum Diameter: 1"
Silicone 1 ply (30-20)
1" x 90 degree overlap splice, stitched.

Download Support Document:
Belt Measuring Tips.pdf

Download Support Document:
Conveyor Belt Order Form-new.pdf