VERSAPROBE PRO RADIOMETERS

VERSAPROBE PRO RADIOMETERS View larger

$1,561.00

New product

+ UV-intensity mW/cm2
+ UV-peak intensity mW/cm2
+ UV-dose mJ/cm2
+ USB ComPort (Option)
+ Graphic chart on computer (Option)


The CON-TROL-CURE® VERSAPROBE PRO RADIOMETERS are a self-contained, high quality UV measuring instrument. It is designed to measure and display UV energy in mW/cm2. An additional function is the scan of the peak value of UV-intensity in mW/cm2 and to measure the UV dose in mJ/cm2 within a pre-set period of 30/60 seconds. In the standard version it is equipped with one UV sensor for the measuring of:

Full UV spectral area 230 – 410 nm (Standard)

Due to its UV sensor and the integrated microprocessor the UV-Probe Integrator can measure and display the peak UV-intensity of the full UV spectrum (mW/cm2). Additionally, this UV-Probe Integrator is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total Integral of UV-dosage over the full UV spectral bands. 

The removable, probe-type sensor is connected to the base unit by a cable of approx. 1 meter (40”) length. In the function “Direct” the actual UV-energy in mW/cm2 supplied to the sensor is measured. The function “Scan” will start a 30/60 second measuring cycle of both, UV-intensity and UV-dose. After completion of the measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display.
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life. 

As an option, this microprocessor integrator is available with an USB ComPort and an evaluation software for downloading the data to a computer to show, edit and store a history of the measuring results of the entire measuring cycle as graphic and numeric charts (mW/cm2) and (mJ/cm2) The UV-Probe Microprocessor Integrator is available in five different measuring ranges:

Probe Integrator
UV-Probe Integrator, Type 1 UV-V (Diazo) 350 – 460 nm
UV-Probe Integrator, Type 2 UV-A 315 – 410 nm
UV-Probe Integrator, Type 3 UV 230 – 410 nm (STD)
UV-Probe Integrator, Type 4 UV-B 280 – 315 nm
UV-Probe Integrator, Type 5 UV-C 230 – 280 nm

Comport Probe Integrator
UV-ComPort Probe Integrator, Type 1 UV-V (Diazo) 350 – 460 nm
UV-ComPort Probe Integrator, Type 2 UV-A 315 – 400 nm
UV-ComPort Probe Integrator, Type 3 UV 230 – 410 nm (STD)
UV-ComPort Probe Integrator, Type 4 UV-B 280 – 315 nm
UV-ComPort Probe Integrator, Type 5 UV-C 230 – 280 nm

TECHNICAL DATA
Spectral range: UV 230 – 400 nm (Standard) or other
Max. Power Input 0 to 5,000 mW/cm2
Display: LCD, 2x16 digits
Display range: 0 to 60,000 mJ/cm2
Measuring range: 0 to 2,000 mW/cm2
Sampling rate: 0.005 sec (200/sec)
Recording cycle: 30 sec.
Power source: AAA batteries (user replace-able)
Dimensions: 5.5” (120 mm) x 3” (75 mm) x 0.4”(10 mm)
Weight: approx. 6 ounce (150 g)
Dimensions of probe: Ø 1.5” (40 mm) x 0.4” (10 mm)
Length of probe cable: approx. 40” ( 1 meter )
Operating temperature: 0 to 113° F / 0 to 45° C 
Base Accuracy: ± 5 % 

While measuring, the UV-Probe Integrator can withstand max. 230° F / 110° C for up to 10 seconds. The temperature of the housing should not exceed 113° F / 45° C. Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings may appear under the same measurement conditions.

CALIBRATION
In order to keep its full function and precision it is recommended to have re-calibration done once per year.  PTB traceable calibration with certificate

Datasheet_UVPS.gif
Download Datasheet:
VERSAPROBE.pdf

SupportDoc_UVPS.gif
Download Support Document:
Measuring UV-Terms and Help.pdf

Manual_UVPS.gif
Download Product Manual:
Versaprobe Pro Manual.pdf

   

This product is no longer in stock

-->
1229 W. Cortland St. · Chicago, IL 60614-4805 · Phone: 1-800-621-1296 OR 773-248-0099 · Fax: 1-800-99FAXUV OR +1-773-880-6647· Email: info@uvps.com © COPYRIGHT 2019 U V Process Supply, Inc.