TAPE DISPENSERS

Several kinds of TAPE DISPENSERS are offered:

(E046-043)
4" (102mm) MULTI ROLL MANUAL TAPE DISPENSER
Ability to dispense FOUR 1" (25.4mm) rolls of tape
Tiered metal bars help guide and separate tape rolls
Comes with 3" (76mm) cores
Non-skid weighted rubber base
Serrated blade
Heavy-duty steel frame
Baked enamel finish

(E046-044)
18" (457mm) WIDE MULTI PURPOSE TAPE AND LABEL DISPENSER
Multi-roll capacity
Serrated cutting blade
Works with die-cut as well as butt-cut labels
Can use up to a 6" (152mm) diameter roll
Dividers adjust to fit different width rolls
Ability to change individual rolls
Rubber suction base
Baked enamel finish
Use any size core
Heavy-duty steel frame

(E046-045)
ENTRY-LEVEL LOW COST TAPE DISPENSER WITH 14 PROGRAMMABLE LENGTHS
Automatically advances tape
Dispense tape from 1.2" to 3.75" (30 to 95mm) in length
Adjustable 14 pre-set lengths in 5mm intervals
Dispense tape from .25" (7mm) to 1" (25.4) in width
Comes with 1" (25mm) and 3" (76mm) cores
Tape is cut by raising and pulling a serrated blade, which activates a switch to advance the next piece to tape
Battery operated or electronic (comes with AC adaptor)

(E046-046)
ELECTRONIC TAPE DISPENSER WITH UP TO "3 PROGRAMMABLE TAPE LENGTHS"
Automatically advance and cut tape
Digital length adjustment
Accepts tape widths from .28" to 2" (7 to 50.8mm)
Cuts tape lengths from .79" to 39" (20 to 999mm)
Program 3 different lengths on demand or automatic
Adjustable pressure feed to help prevent curling of tape
Manual override of preset lengths
Photocell actuated feed mechanism & cutter or push-button feed & cut
Cabinet made from flame retardant antistatic material (auto ignition of 896F / 480C)
Comes with a 3" (76mm) core others available
Accuracy of tape length is .04" (1mm), dependent on type of material
Many available accessories to fit with this machine
Ideal for medium to high production facilities
Blades good for 200,000 cuts

(E046-047)
ELECTRONIC "HEAVY DUTY" TAPE DISPENSER
Accepts tape widths from .59" to 9.84" (15 to 250mm)
Cuts tape lengths from 1.97" to 394" (50 to 9999mm)
Designed for continuous industrial applications
Cuts virtually any tape
Automatic cutter and tape feed
Can be modified to dispense non-adhesive materials
Digital push wheel display for easy length adjustments
Manual or automatic dispensing
Variable feed intervals, automatic delay up to 10 seconds
Fully enclosed metal cabinet
Safety switch inside front cover
Optional foot switch

(E046-048)
ELECTRONIC "HEAVY DUTY" TAPE DISPENSER
Automatically dispenses and cuts virtually any tape - including duct tape
Designed for continuous industrial use applications
Compact design and heavy duty metal construction
Accepts tape widths from .375" (9.5mm) to 3.15" (80mm)
Cut lengths from 2" (50mm) to 394" (9999mm)
Accuracy +/- .04" (1mm) (dependant on type of tape)
9" (251mm) maximum outside diameter roll
Digital push switch display for easy length adjustments
Comes with standard 3" (76mm) core
Adjustable feed intervals
Safety interlock
Can dispense some non-adhesive materials
Switchable voltage (100v/115v or 230v)
Four operating modes (Feed, Manual, Auto and Interval)
Optional foot switch available

(E046-049)
ELECTRIC GUMMED TAPE DISPENSER
A single touch feeds a measured length of tape from 6" to 45" (152.4 to 1143mm)
Large capacity water bottles (46oz., 1.3l) for long intervals between fill-ups
14 pre-set length buttons for easy dispensing
Comes with a 2X button to double any pre-set length buttons
Random length feeds as long as the button is pressed
Repeat button feeds the last length selected no need for the operator to remember which length was used last and is ideal when several cartons of the same size are used
Quiet long life drive motor only operates when length button is engaged
Stainless steel tape guides and heavy duty, all metal frame for strength and durability
Long life powder coated finish for prevention of corrosion for years of dependable service
Triple brushes moistening system with an ABS plastic corrosion resistant water tray
Adjustable top heater ensures superior tape adhesion, constant water temperature and maximum wetting and activation of tape, which is useful in cold climates
Adjustable water level
Uses plain or reinforced paper tapes
Microprocessor control improves reliability and serviceability
Easy touch membrane switch electronic key pad
Easy to refill water bottle with no connecting cables
Simple to use no special operator training
One year parts warranty

(E046-060)
4.5" (114mm) WIDE - ELECTRIC LABEL DISPENSER
Ideal for virtually any kind of label from bar code to packaging
Will dispense labels and die-cut parts
Will dispense labels from .25" to 4.5" (6.4 to 114mm) in width
Will dispense labels from .50" to 6" (12.7 to 152mm) in length
Will accommodate core sizes from 1" (25.4mm) up
Photosensor Accuracy and Reliability
Automatically removes paper, vinyl, acetate, polyester, foil, etc. from its liner
Automatically rewinds liner scrap for a cleaner working environment
Liner scrap is easily removed
No tools required for adjusting to different size labels
All metal construction
No maintenance required
Adjustable strip plate for hard-to-release labels
LD5100C for clear labels
LD5100R for black or metallic labels
High Torque Motor for large diameter label rolls

(E046-061)
ELECTRONIC NON-ADHESIVE CUTTER "LIGHT DUTY”
Accepts material widths up to 2" (50.8mm)
Cuts material lengths from .79" to 39" (20 to 999mm)
Ideal for light duty cutting of shrink tubing and sleeving
Automatic material feed and cut
Maximum roll outside diameter 7"(178mm) see Accessories for extension stand
Photo-electric actuation of cutter or manual feed
Fast and accurate and eliminates waste
Insures consistent size of pieces
Ideal for assembly kitting
Eliminates operator fatigue caused by squeezing of hand cutters
Digital length adjustment
Manual override of preset lengths
Optional counter and foot switch available, see Accessories

(E046-062)
WIDE NECK BAG SEALER WITH CUTTER
Automatically measures and cuts tape
Designed for larger or thicker bags
Use any thin polyester or reinforced paper tapes
No assembly or maintenance required
Comes with a 3" (76mm) core
Pre-drilled holes in base for easy mounting to work surfaces
Compact design
Eliminate twist tying
Heat-treated steel blade
Bag trimmer