Ask A Question - email us at info@uvps.com
UV Literature Forms Data Sheets UVPS International Representatives

UV Lamps

UV Lamps

UV Process Supply Home Page

Help Me Find It! - email us at info@uvps.com

The Complete Source
For All Your
UV Curing Needs!

Microwave Parts, Lamps magetrons, screens, ignigtor bulbs
Microwave Parts

Safety Products- Gloves, Hand Cleaner, Eye protection, Full Body protection Ink & Coating Handling: Storing, Mixing, Dispenisng, Measuring Maintenace & Shop: Clean-Up Supplies, Shop Supplies, Shop Lighting, Static Control, Shop Safety, Equipment Maintenance. Curing Controls: Speed Monitors, Temperature & Air Monitors, UV Radiation Dose Monitors, Degree of Polymerization, Film Thickness Controls, Physical Test Equipment, UV Inspection. Curing Equipment: Laboratory Curing Equipment, Small Area Curing Equipment, Low Intensity UV Lamps, Replacement UV Lamps, UV Curing Equipment. Printing Supplies: Screen Printing Supplies, Squeegee and Accessories, Applicators, Screen Making Supplies, Screen Cleaning Supplies, Offset Printing Supplies, Graphic Arts Supplies, Color Inspection, Pantone Products, Bench Magnifiers, Folding Magnifiers, Lighted Magnifiers, Swivel-Arm Magnifiers, Microscopes, Graphic Arts Supplies.
Safety Products Ink Coating & Handling Maintenance & Shop Curing Controls Curing Equipment Printing Supplies
LOGIN MENU ORDER TRACKING YOUR ORDER
CheckoutORDER CHECKOUT

LAMP VOLTAGE INTERFACE (LVI)
 

Back to : HOME : CURING EQUIPMENT: E1 UV CURING SYSTEMS : UV EQUIPMENT

 


Download Datasheet:
ts-lvi.PDF


Download Product Manual:
PM-Lamp_Voltage_Interface.PDF

   

 
LAMP VOLTAGE INTERFACE (LVI)

Consistent electrical draw by a UV curing system is essential to maintaining peak UV lamp performance. With reliable electrical service, UV curing lamps will perform with greater predictability to deliver more consistent, repeatable results. CON-TROL-CURE's LAMP VOLTAGE INTERFACE (LVI), a fully compatible volt measurement device, monitors this draw and can be installed into any CON-TROL-CURE or 3rd party UV curing system.

The LVI integrates parallel to your curing equipment's power supply and irradiator to provide continuous feedback of voltage level during operation. When interfaced with a high impedance panel-mount volt meter, the LVI provides a numerical power reading of lamp energy draw. The operator can use this numerical value to determine when a lamp stabilizes and is ready for use. This numerical value is critical in establishing an initial baseline after installing a new lamp.

As the lamp degrades over time, or if air flow (cooling) within the housing is increased and inadvertently lowers lamp temperature, the lamp will draw less energy. As a result, the LVIs numerical reading will be less than its initial baseline. This indicates the lamp is drawing less power and may be performing at less than peak efficiency.

By noting this change in numerical values, you can quickly cross-check this variance through physical cure evaluation before under-cured product is generated. If the tested product fails to cure at this numerical value, you can eliminate the inefficiency by changing the lamp, increasing power, or by changing air flow characteristics.

STANDARD FEATURES:
Directly reports lamp condition
Integrates into any UV curing system
Assists in identifying poor performance
Translates high voltage for use with standard voltmeters
Provides visual, numerical energy values for use in determining lamp performance
Easy to install and access
Mounts parallel to lamp wiring to provide direct reading

OPTIONAL FEATURES:
Panel-mount volt meter display

For more information, visit the CON-TROL-CURE website at:

response.write virtual="/inc_files/DisplayImageAndTextFiles.asp"

Not what you are looking for? Try other UV EQUIPMENT, such as:

10 INCH FOCUS LIGHT HOUSING

3 QUARTER ELLIPTICAL LIGHT HOUSING

6 INCH FOCUS LIGHT HOUSING

 
Part Number
A004-003
STEP DN TRNSFRMR 100/1
$154.00 / EACH (USD)
order now

Part Number
A004-004
VOLTMETER:TRMS
$377.00 / EACH (USD)
order now

Part Number
A004-005
LAMP VOLTAGE INTERFACE PANEL MOUNT
$375.00 / EACH (USD)
order now

Part Number
A004-006
STPDN TRNSRMR PNL MNT+
$550.00 / EACH (USD)
order now

 
PRICE QUOTE - email us at quotes@uvps.com




'
           
UVPS HomePage Who We Are - About UV Process Supply Jobs at UV Process Supply Sales Items at UVPS   Contact Us
           
UV Process Supply

1229 W. Cortland St.  Chicago, IL 60614-4805  Phone: 1-800-621-1296 OR 773-248-0099  Fax: 1-800-99FAXUV OR +1-773-880-6647 Email: info@uvps.com
COPYRIGHT 2011 U V Process Supply, Inc. * Call us on Skype "uvprocess"