Ask A Question - email us at info@uvps.com
UV Literature Forms Data Sheets UVPS International Representatives

UV Lamps

UV Lamps

UV Process Supply Home Page

Help Me Find It! - email us at info@uvps.com

The Complete Source
For All Your
UV Curing Needs!

Microwave Parts, Lamps magetrons, screens, ignigtor bulbs
Microwave Parts

Safety Products- Gloves, Hand Cleaner, Eye protection, Full Body protection Ink & Coating Handling: Storing, Mixing, Dispenisng, Measuring Maintenace & Shop: Clean-Up Supplies, Shop Supplies, Shop Lighting, Static Control, Shop Safety, Equipment Maintenance. Curing Controls: Speed Monitors, Temperature & Air Monitors, UV Radiation Dose Monitors, Degree of Polymerization, Film Thickness Controls, Physical Test Equipment, UV Inspection. Curing Equipment: Laboratory Curing Equipment, Small Area Curing Equipment, Low Intensity UV Lamps, Replacement UV Lamps, UV Curing Equipment. Printing Supplies: Screen Printing Supplies, Squeegee and Accessories, Applicators, Screen Making Supplies, Screen Cleaning Supplies, Offset Printing Supplies, Graphic Arts Supplies, Color Inspection, Pantone Products, Bench Magnifiers, Folding Magnifiers, Lighted Magnifiers, Swivel-Arm Magnifiers, Microscopes, Graphic Arts Supplies.
Safety Products Ink Coating & Handling Maintenance & Shop Curing Controls Curing Equipment Printing Supplies
LOGIN MENU ORDER TRACKING YOUR ORDER
CheckoutORDER CHECKOUT

UV-2C CUBE LOGGER
 

Back to : HOME : CURING CONTROLS: D3 UV MEASUREMENT : RADIOMETERS SPECIAL TYPES

 


Download Datasheet:
RDMTRSPL X.pdf


Download Support Document:
Measuring UV-Terms and Help.pdf

   

 
UV-2C CUBE LOGGER

The UV-2C CUBE LOGGER features:

+ 3D measuring
+ Selection of two different 2 sensors
+ UV-Intensity mW/cm2
+ UV-Dose mJ/cm2
+ Temperature measuring C/F (option)
+ Various UV-ranges available
+ Permanent or triggered measuring mode*
+ SD-Card Slot (option)
+ Graphic and numerical chart on computer (option)

The UV-2C Cube Logger is a self-contained, high quality UV measuring instrument. It is designed to measure and display peak UV intensity and UV dosage in the UV curing process. It is equipped with a selection of two different UV sensors. With these two different UV-bands plus the total UV band, most of the measuring requirements of UV curing applications can be covered. Due to its two UV sensors and the integrated microprocessor the UV-2C Logger can measure, record and display the peak of the UV-intensity (mW/cm2) for each UV-band individually plus the peak of total UV intensity. Additionally, this UV-Integrator is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated for each UV-band (e.g. UV-A, UV-B, UV-C or UV-V) individually and as total Integral of UV-dosage. This allows to determine not only the total energy, but also how that energy is delivered, i.e., what intensity and dose at what UV-band. Optionally, an extra sensor measures temperatures from 32 to 230 F / 0 to 110 C

*This Logger features a selectable triggered mode, i.e. the 30 sec recording cycle starts within a 120 second readiness phase not before the incident UV-intensity exceeds 2 mW/cm.

The sensors are on one side of the unit in different directions, while the display is on the opposite side. After completion of the measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display. A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life. The UV-2C Cube Logger is optionally available equipped with an SD-Card Slot and an evaluation software for downloading the data to a computer to show, edit and store a history of the measuring results of the entire measuring cycle as graphic charts (mW/cm2) and (mJ cm2)

The UV-2C Cube Logger is available as follows:

UV-2C Cube Logger UV-A + UV-V
UV-2C Cube Logger UV-A + UV-B
UV-2C Cube Logger UV + UV-A
UV-2C Cube Logger UV + UV-B
UV-2C Cube Logger UV + UV-V
UV-2C Cube Logger UV-B + UV-V
UV-2C Cube Logger UV-C + UV-V

TECHNICAL DATA
Spectral ranges: UV-A 315 410 nm
UV-B 280 315 nm
UV-C 230 280 nm
UV-V 395 445 nm
UV 230 410 nm
Max. Power Input 0 to 5,000 mW/cm2
Display: LCD, 2x16 digits
Display range: 0 to 36,000 mJ/cm2
Measuring range: 0 to 2,000 mW/cm2
Sampling rate: 0.005 sec (200/sec)
Measuring period: 30 sec.
Readiness phase: 120 sec.
Power source: 7.2 V NiMH Accu-Pack, 70 mA, re-chargeable
Power consumption: 20 A
Battery service life: 1,000 charging cycles
Dimensions: 2.4 x 2.4 x 2.4 (60 x 60 x 60 mm)
Weight: approx. 17.5 ounce (500 g)
Operating temperature: 0 to 113 F / 0 to 45 C
Heat protection: Heat shield
Base Accuracy: 5 %

While on the conveyer belt, the UV-2C Cube Logger can withstand max. 230 F / 110 C for up to 10 seconds. The temperature of the housing should not exceed 113 F / 45 C. Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings may appear under the same measurement conditions.

CALIBRATION
In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery. PTB traceable calibration acc. to DIN EN ISO / IEC 17025 with certificate
response.write virtual="/inc_files/DisplayImageAndTextFiles.asp"

Not what you are looking for? Try other RADIOMETERS SPECIAL TYPES, such as:

AIR FLOW DATA SAMPLERS I D AND IID

CON-TROL CURE UV SENSORS

MICRO PUCK (SERIES) RADIOMETER

 
Part Number
M007-389
RADM UV-2C CUBE LOG
$3,642.00 / EACH (USD)
order now

Part Number
M007-390
RADM UV-2C CUBE LOG
$3,794.00 / EACH (USD)
order now

Part Number
M007-391
RADM UV-2C CUBE LOG
$3,642.00 / EACH (USD)
order now

Part Number
M007-392
RADM UV-2C CUBE LOG
$3,794.00 / EACH (USD)
order now

Part Number
M007-393
RADM UV-2C CUBE LOG
$3,642.00 / EACH (USD)
order now

 
PRICE QUOTE - email us at quotes@uvps.com




'
           
UVPS HomePage Who We Are - About UV Process Supply Jobs at UV Process Supply Sales Items at UVPS   Contact Us
           
UV Process Supply

1229 W. Cortland St.  Chicago, IL 60614-4805  Phone: 1-800-621-1296 OR 773-248-0099  Fax: 1-800-99FAXUV OR +1-773-880-6647 Email: info@uvps.com
COPYRIGHT 2011 U V Process Supply, Inc. * Call us on Skype "uvprocess"