Ask A Question - email us at info@uvps.com
UV Literature Forms Data Sheets UVPS International Representatives

UV Lamps

UV Lamps

UV Process Supply Home Page

Help Me Find It! - email us at info@uvps.com

The Complete Source
For All Your
UV Curing Needs!

Microwave Parts, Lamps magetrons, screens, ignigtor bulbs
Microwave Parts

Safety Products- Gloves, Hand Cleaner, Eye protection, Full Body protection Ink & Coating Handling: Storing, Mixing, Dispenisng, Measuring Maintenace & Shop: Clean-Up Supplies, Shop Supplies, Shop Lighting, Static Control, Shop Safety, Equipment Maintenance. Curing Controls: Speed Monitors, Temperature & Air Monitors, UV Radiation Dose Monitors, Degree of Polymerization, Film Thickness Controls, Physical Test Equipment, UV Inspection. Curing Equipment: Laboratory Curing Equipment, Small Area Curing Equipment, Low Intensity UV Lamps, Replacement UV Lamps, UV Curing Equipment. Printing Supplies: Screen Printing Supplies, Squeegee and Accessories, Applicators, Screen Making Supplies, Screen Cleaning Supplies, Offset Printing Supplies, Graphic Arts Supplies, Color Inspection, Pantone Products, Bench Magnifiers, Folding Magnifiers, Lighted Magnifiers, Swivel-Arm Magnifiers, Microscopes, Graphic Arts Supplies.
Safety Products Ink Coating & Handling Maintenance & Shop Curing Controls Curing Equipment Printing Supplies
LOGIN MENU ORDER TRACKING YOUR ORDER
CheckoutORDER CHECKOUT

UV-POWER INTEGRATOR 06
 

Back to : HOME : CURING CONTROLS: D3 UV MEASUREMENT : RADIOMETERS BELT STYLE

 


Download Datasheet:
UV-POWER INTEGRATOR 06.PDF

   

 
UV-POWER INTEGRATOR 06

The UV-POWER INTEGRATOR 06 is a small, only 6 mm flat, self-contained, pass-through UV-Microprocessor Integrator

+ UV intensity mW/cm2
+ UV dose mJ/cm2
+ Selectable triggered mode*
+ Temperature (option UV-T)
+ 2 line LCD display
+ Extra flat only 6 mm / .25 inc

It is specially designed to measure, record and display peak UV intensity, UV dosage, and optionally (UV-T) temperature, in the UV curing process of narrow web presses and in some applications of the flexo print. It is equipped with one UV sensor and optionally with one additional temperature sensor for the individual measuring of:

UV 230 400 nm
Temp: 0 to 230 F / 0 to 110 C (option UV-T)

With this full band UV measuring and an extra temperature measuring, most of the measuring requirements of UV curing in extreme narrow applications can be covered. It measures only 4.5 x 2.5 x 0.25 (117 x 64 x 6 mm). Due to its integrated microprocessor the UV-Power Integrator 06 can measure, record and display the peak of the UV-intensity (mW/cm2). Additionally, it is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as a total Integral of UV-dosage over the full UV spectral area 230 410 nm. This allows to determine a profile of how that energy is delivered at which intensity. Optionally, an extra sensor measures temperatures from 0 to 230 F / 0 to 110 C (option UV-T)

The sensor is on the back of the unit which also serves as a heat shield. After completion of the measuring cycle all measuring results can be scrolled through on the built in 2 x 16 digit LCD display. A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life. The measuring period is 30 seconds at a sampling rate of 200/sec.

TECHNICAL DATA
Spectral range: UV 230 410 nm
Temperature range: 0 to 230 F / 0 to 110 C (UV-T Power Integrator)
Max. Power Input 0 to 5,000 mW/cm2
Measuring range: 0 to 2,000 mW/cm2 or 2,000 to 5,000 mW/cm2
Recording cycle: 30 sec.
Readiness phase: 120 sec.
Sampling rate: 0.005 sec (200/sec)
Display: LCD, 2 lines x 16 digits
Power source: 2 x long life 3.0 V Lithium Battery
Power consumption: 20 A
Battery service life: 2,000 measuring cycles
Dimensions: 4.5 x 2.5 x 0.25 (117 x 64 x 6 mm)
Weight: approx. 3 ounce (85 g)
Heat protection: Heat shield on back plate
Operating temperature: 32 to 113 F / 0 to 45 C
Base Accuracy: 5 %

While on the conveyer belt, the UV-Power Integrator 06 can withstand max. 230 F / 110 C for up to 10 seconds. The temperature of the housing should not exceed 113 F / 45 C. Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings may appear under the same measurement conditions.

CALIBRATION
In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery. PTB traceable calibration acc. to DIN EN ISO / IEC 17025 with certificate
response.write virtual="/inc_files/DisplayImageAndTextFiles.asp"

Not what you are looking for? Try other RADIOMETERS BELT STYLE, such as:

DISKURE 365 RADIOMETER

DISKURE 4SCAN (SERIES) RADIOMETERS

EIT POWERPUCK II AND UVICURE PLUS II RADIOMETERS

 
Part Number
M007-338
RADM UV PWR INT 06 T1
$2,356.00 / EACH (USD)
order now

Part Number
M007-339
RADM UV PWR INT 6 T2
$2,356.00 / EACH (USD)
order now

Part Number
M007-340
RADM UV PWR INTO 06 T3
$2,356.00 / EACH (USD)
order now

Part Number
M007-341
RADM UV-T PWR INT T1
$2,930.00 / EACH (USD)
order now

Part Number
M007-342
RADM UV-T PWR INT 6 T2
$2,930.00 / EACH (USD)
order now

Part Number
M007-343
RADM UV-T PWR INT 6 T3
$2,930.00 / EACH (USD)
order now

 
PRICE QUOTE - email us at quotes@uvps.com




'
           
UVPS HomePage Who We Are - About UV Process Supply Jobs at UV Process Supply Sales Items at UVPS   Contact Us
           
UV Process Supply

1229 W. Cortland St.  Chicago, IL 60614-4805  Phone: 1-800-621-1296 OR 773-248-0099  Fax: 1-800-99FAXUV OR +1-773-880-6647 Email: info@uvps.com
COPYRIGHT 2011 U V Process Supply, Inc. * Call us on Skype "uvprocess"